В случае если головка блока цилиндр

В случае если головка блока цилиндров не снимается с блока, внутрь камеры сгорания через свечное
отверстие можно ввести канат, затем подвести поршень к ВМТ — так предотвращается отпускание
клапана в камеру сгорания при сжатии пружин

結果 (英文) 1:

If the cylinder head is not removed from the block, inside the combustion chamber through the candleYou can enter the hole, rope then bring the piston to TDC — prevents the releasevalve in combustion chamber with compression springs

結果 (英文) 2:

If the cylinder head is not removed from the unit, into the combustion chamber through the spark plug
hole, you can enter a rope, then take the piston to TDC - so prevents the release
valve into the combustion chamber during the compression springs

結果 (英文) 3:

if the cylinder head is removed from the block, into the combustion chamber through the свечноеyou can enter the hole, then place the plunger to the nrmm - предотвращается отпусканиеa valve in the combustion chamber with the compression springs