В случае если головка блока цилиндр

В случае если головка блока цилиндров не снимается с блока, внутрь камеры сгорания через свечное отверстие можно ввести канат, затем подвести поршень к ВМТ — так предотвращается отпускание клапана в камеру сгорания при сжатии пружи

結果 (英文) 1:

If the cylinder head is not removed from the block, inside the combustion chamber through the hole plug, you can enter the rope, then bring the piston to TDC — prevents the release valve in combustion chamber during compression pruži

結果 (英文) 2:

If the cylinder head is not removed from the unit, into the combustion chamber through the spark plug hole, you can enter a rope, then take the piston to TDC - so prevents the release valve into the combustion chamber during compression pruzhi

結果 (英文) 3:

if the cylinder head is removed from the block, into the combustion chamber through the свечное hole can enter the cable, then place the plunger to the nrmm - предотвращается отпускание valve in the combustion chamber in the compression пружи